1. Numbered sizes, and why the larger sizes are reported as hard to find
Copper rivets come in numbered sizes. In maker discussions, #9 is often described as easy to find, while #7 and #5 are described as hard to find, with only one or two sellers listed online.
That scarcity claim comes from makers' own experience, not from a seller catalogue check. It is a useful signal that larger sizes may take more searching, but it is not a counted survey of sellers, and it does not name any seller or give any commercial terms.
2. Patina, and why sweat is mentioned
Green patina can appear where a copper rivet meets sweat — sweat, not just air or water, was pointed out in discussion as the trigger.
Whether a given rivet will patinate, and how fast, depends on use and finish, and is not something a listing photo can settle. A photo shows how a part looked when it was photographed, not how it will age in use.
3. Copper is not brass, and a copper colour is not solid copper
Copper and brass are different metals. A brass rivet is not a substitute for a copper rivet, and a copper-coloured finish is not the same as solid copper.
If a listing says "copper" without a grade or a per-part material statement, that is still unconfirmed. A grade and a per-part statement are what would turn a title word into a checkable material description; without them, the material claim remains a title claim.
- Copper — the metal itself, distinct from brass.
- Brass — a different alloy, not a substitute for copper in a copper rivet.
- Copper colour / copper finish — a colour description. It says something about how the part looks and nothing, on its own, about what it is made of.
4. Choosing a size: start from the leather and the length you need
Start from leather thickness and rivet length actually needed, not from the size number alone — the number does not tell you cap diameter, shank diameter, or washer size on its own.
| Question to answer | Where the answer comes from |
|---|---|
| What size number is it? | The listing or the maker discussion — for example #9, #7, or #5. |
| What is the cap diameter? | The part dimensions, not the size number alone. |
| What is the shank diameter? | The part dimensions, not the size number alone. |
| What is the washer size? | The part dimensions, not the size number alone. |
| Will it suit this leather thickness and length? | Leather thickness and rivet length actually needed, checked against the part dimensions. |
5. Questions we hear
Why are #7 and #5 copper rivets described as hard to find?
That description comes from maker discussions, not from a seller catalogue check. In those discussions, #9 is often described as easy to find, while #7 and #5 are described as hard to find, with only one or two sellers listed online. Treat it as a report of what makers have experienced, not as a counted survey of sellers.
Does green patina mean a copper rivet is faulty?
Maker discussion points to sweat as a trigger for green patina where a copper rivet meets sweat, rather than air or water alone. Whether a given rivet will develop patina, and how fast, depends on use and finish, and is not something a listing photo can settle.
Can a brass rivet replace a copper rivet?
No. Copper and brass are different metals. A brass rivet is not a substitute for a copper rivet, and a copper-coloured finish is not the same as solid copper.
Does the size number alone tell you whether a rivet will fit?
No. The size number does not tell you cap diameter, shank diameter, or washer size on its own. Start from the leather thickness and the rivet length actually needed, and check those dimensions alongside the size number.
6. What this guide does not do
This guide is educational only. It does not name any seller or promise that any particular part can be sourced. If you are choosing a copper rivet, the points above are a starting checklist for reading a listing — not a substitute for a grade and a per-part material statement from the seller.
Varestaq is an independent sourcing and product development partner based in China. Manufacturing partners are evaluated for each project; we do not operate a factory. Supplier capability, compatibility, MOQ, tooling requirements and lead time must be verified against your actual requirements before commitment.
Discuss your part, drawing or specification