Custom Hardware RFQ Checklist
A practical checklist for turning a part idea, drawing or sample into a supplier brief — with open questions clearly separated from confirmed requirements.
Written the way we work: define the requirement, compare real options, verify before committing. Start with the question you are facing now.
A practical checklist for turning a part idea, drawing or sample into a supplier brief — with open questions clearly separated from confirmed requirements.
Turn separate supplier offers into a decision record: first align the scope, then examine cost, evidence and unresolved conditions.
Decide whether a proposed production route fits your initial order and realistic repeat demand — without assuming a universal minimum quantity.
Use the old part as a starting point for investigation — not as proof that a visually similar component will fit or perform correctly.
A sample inspection described honestly: what we check on a real batch before shipping, and what a sample check cannot prove.
A product title that says “brass” proves nothing. The practical checks that separate solid brass from brass-plated hardware — and what each check can and cannot prove.
An educational guide to pure copper rivets: what maker discussions report about numbered sizes, what they report about patina, how copper differs from brass, and why a size number alone does not settle fit.
The number that decides whether a replacement buckle fits is inner width, not belt size and not outside width. How to measure inner width, pin type, and strap thickness.
A tri-glide adjusts strap length; a D-ring anchors it. Size a tri-glide by inner width and doubled folded thickness, and know when a D-ring wins instead.
Start from the product you already sell: derive the buckle spec backwards — inner width, pin type, strap thickness — then source and sample-verify before committing to a batch.
A snap fastener fails on size and thickness, not style. Four pieces, post length matched to leather thickness, and material asked piece by piece.
A brass buckle fails on pin type and size, not colour. Pin types first, then inner width, pin, and strap thickness, with material asked piece by piece.
A strap width that does not fit was usually measured in the wrong place. Measure strap width at the buckle end, match it to inner width, and hand over thickness at the hole together.
A buckle that will not close is rarely a broken buckle. Check three numbers — pin length, strap thickness at the hole, strap width at the buckle end — before you order a replacement.
A rivet size number is a starting point, not a size. Measure head diameter, post diameter, post length, and washer size in millimetres — one maker’s #12 can measure differently from another’s.
Share a photo, drawing, sample reference or basic dimensions. We’ll help clarify the requirement, compare suitable supplier routes, and define the next practical step toward sampling or production.