1. A size chart lists four pieces, not one number
A snap fastener is four pieces, not one. The cap pairs with the socket. The post pairs with the stud. The socket holds a spring inside it, and that spring is what grips the stud when the snap closes. If any one of those four does not match the rest, the snap either will not close, or it closes once and pops open in use.
A snap fastener size chart is useful only if it lists all four. The size in a listing usually refers to only one piece — the cap, the part you see on the outside. It says nothing by itself about the socket, the post, or the stud. Those three each have their own diameter, and those still have to match the set.
So the first thing to check on any chart is whether it lists more than the cap. A chart that gives only the cap diameter is not enough to order from. Ask the maker for the full size chart for that exact series, and check the diameter of each of the four pieces on it.
| Piece | What to check on the chart |
|---|---|
| Cap — pairs with the socket | Cap diameter — this is usually the listed size |
| Socket — pairs with the cap | Socket diameter and spring grip on the stud |
| Post — pairs with the stud | Post length against your leather thickness |
| Stud — pairs with the socket | Stud diameter against the socket spring |
2. Line numbers in millimetres — approximate, not locked
Snap fastener sizes are usually given as Line numbers: Line 20, Line 24, and so on. A Line number is a size step, and one Line is about 0.635 mm. That step is approximate, and the millimetre values below are approximate too — they are a way to compare Line numbers, not a locked standard.
Two sizes come up most often in leather work. Line 20 is about 12.5 mm for the cap. Line 24 is about 15 mm for the cap — some public sources put it at 14.8 to 15 mm. Treat both numbers as approximate.
The warning matters more than the numbers. Different makers' series vary, so the same Line number can measure differently from one maker to another. Never treat a Line-to-millimetre conversion as a locked size for an order. The number to order from is the one on that maker's full size chart for that exact series.
| Line number | Cap diameter, approximate |
|---|---|
| 1L (one Line step) | ≈ 0.635 mm — the Line-to-millimetre step, approximate |
| Line 20 | ≈ 12.5 mm cap diameter — approximate, not a locked standard |
| Line 24 | ≈ 15 mm cap diameter (some sources 14.8–15 mm) — approximate, not a locked standard |
If a chart gives a Line number with no millimetres at all, ask for the millimetres before you order. A Line number on its own is not a size you can cut leather to.
3. Cap size against the work
The cap size gives you a starting point, not an answer. A 15 mm cap is the larger end of the range most leather work uses, a 12.5 mm cap sits in the middle, and a 10 mm cap suits thinner work — but the cap size alone does not tell you the post length, and the post length is what has to match the thickness.
Start from the leather, not from the catalogue page. How thick is the stack the snap has to go through, both layers together? What is the cap size you need, and what post length goes with that thickness? If you can answer those two questions, most snap problems go away before you order.
| Cap size, approximate | Where it usually sits |
|---|---|
| ≈ 10 mm cap | Thinner work |
| ≈ 12.5 mm cap (Line 20) | Middle of the range most leather work uses |
| ≈ 15 mm cap (Line 24) | Larger end of the range most leather work uses |
A post that is too long for the stack does not pull the snap tight, and the snap works loose. A post that is too short does not reach through at all. Test on a stack that matches the finished work: same leather, same layers, same thickness. If it only works on a thinner test scrap, it does not work yet.
4. How to read a maker's size chart before ordering
Use the chart as a checklist, not as a picture to glance at. Work down it piece by piece, and do not order until every line has an answer.
- Series name — the chart must be for the exact series you are ordering, not a different series from the same maker
- Cap diameter in millimetres, and the Line number it corresponds to
- Diameter of each of the other three pieces — socket, post, and stud
- Post length options, and the leather thickness stack each one suits
- What each piece is made of, asked piece by piece, including the spring
- Finish, stated separately from material
Two things on that list deserve a second look. First, the spring inside the socket is made to flex and grip, and it is not safe to assume it is the same material as the cap. If a listing calls the whole set one material without breaking it down by piece, ask for the breakdown before you treat that claim as settled — and never treat a whole snap set as one material on the strength of a single word. Second, finish is how the snap looks, not what each piece is made of. A gold-coloured snap is not automatically a brass snap.
If any line on the chart is blank, the chart is not finished. Ask for the missing number in writing and keep the answer with the order. If a part's material is not confirmed, say it is not confirmed.
5. Types of snap fasteners, and words that are not sizes
Listings for leather snaps and fasteners use several names for the same four-piece snap: snap fastener, snap button, and press stud, which is the British term for the same thing. The name does not change the size. Check the chart the same way whatever the listing calls it.
Some listings say heavy duty snap fasteners for leather or heavy duty snap buttons for leather. Heavy duty is a listing word, not a size standard. A heavy duty snap still has to be checked the same way: cap diameter, the other three pieces, and post length against your leather. If the listing gives no diameters, the words heavy duty tell you nothing you can order from.
The same caution applies to any size word in a listing. A size only means something when it is tied to a piece — cap, socket, post, or stud — and to a maker's chart for that exact series. A Line number without a chart, or a millimetre number without a piece name, is not a size yet.
For the full method — matching post length to leather thickness, asking material piece by piece, and matching the closure to the product — see Snap Fasteners for Leather: How to Size and Match Them. For how solid brass differs from brass-plated hardware, see Brass Hardware Sourcing.
6. What to send, and quick answers
If you are asking someone else to make or supply a snap, send these and you will skip most of the back-and-forth:
- Cap diameter, in millimetres, and the Line number it corresponds to
- Diameter of each of the other three pieces — socket, post, and stud
- Post length, and the leather thickness stack it has to go through
- Maker series name, so the chart you are reading is the chart for that series
- What each piece is made of, asked piece by piece, including the spring
- Finish, stated separately from material
That is enough to check whether a standard set fits or whether it needs a different post length or series.
What does Line 20 mean in millimetres? About 12.5 mm for the cap, approximately. Line numbers are not a locked standard — different makers' series vary, so confirm against that maker's full size chart before you order.
Is the size on the listing the size of the whole snap? No. In most listings it is the cap diameter. The socket, post, and stud each have their own diameter, and those still have to match the set.
Why do two makers list different millimetres for the same Line number? Because a Line number is not one standard shared by every maker. Series vary between makers, so the same Line number can measure differently. The maker's own full size chart for that exact series is the number to order from.
Can I use a Line 24 cap with a Line 20 socket? Do not count on it. Sets are made to work as a set. Test the exact four pieces together on your actual leather before you order in quantity.
Does "heavy duty" mean a bigger snap? Not by itself. Heavy duty is a listing word, not a size. Check the cap diameter, the other three pieces, and the post length against your leather the same way you would for any other snap.
This is a choosing method, not a product test. No specific snap, maker, or material result is claimed here. Line-to-millimetre values on this page are approximate; confirm against the maker's full size chart before ordering.
Related guides
Varestaq is an independent sourcing and product development partner based in China. Manufacturing partners are evaluated for each project; we do not operate a factory. Supplier capability, compatibility, MOQ, tooling requirements and lead time must be verified against your actual requirements before commitment.
Discuss your part, drawing or specification