1. First, make sure it is a bag lock, not a door lock
A turn lock that does not work was usually not bought in the wrong colour. It was bought in the wrong shape for the bag, the wrong size for the flap, or in a metal that was never confirmed piece by piece. And the first trap is the name itself: most "turn lock" searches are for door hardware. This page is about the bag closure — the lock on a handbag or leather bag flap.
"Turn lock" covers two different products. The door kind is a thumb turn — the small knob that locks a door from the inside. The bag kind is a closure on a handbag or leather bag flap: a base fixed to the body and a bar that turns to catch the flap. Same words, different product, different suppliers, different sizes.
In our Keyword Planner check (US, English, November 2025 to October 2026), "turn lock" runs 100 to 1,000 searches a month and is up 900% year on year — but the related searches are dominated by door hardware: thumb turn lock, Yale thumb turn lock, thumb turn mortice lock. If you are buying for a bag, check the listing shows a bag closure before anything else: a flap, a bag body, a small face plate — not a door.
The practical rule is short. If the listing does not show it on a bag, ask the seller "is this for a handbag flap?" before you check size or price.
2. Shapes: round, rectangle, oval — pick the shape before the size
The three shapes buyers ask for are round, rectangle, and oval. Shape is a design decision first: it has to sit right on the flap and match the rest of the bag's hardware. It is also a fitting decision. A rectangle is longer one way than the other, so its orientation on the flap matters. An oval and a round sit differently on a narrow flap than on a wide one.
What we found in US stock: only two solid-brass turn lock models, one size each — and no rectangle or oval solid-brass option at all. If your bag needs a rectangle or an oval in solid brass, that is not a stock item. It is a custom order.
Size comes after shape. Ask for the face width and height in millimetres, and for the mounting and post dimensions for that exact lock — and measure them on the sample. We have no verified size table for turn locks, so we publish none: a single number on a listing does not say which measurement it is. If a listing gives one number, ask what it measures.
| Shape | What to check |
|---|---|
| Round | Face diameter in millimetres; sits the same in any orientation |
| Rectangle | Face width and height, and which way it mounts on the flap |
| Oval | Face width and height; check it against the flap width where it mounts |
3. "Solid brass" has to be asked piece by piece
A turn lock is not one piece of metal. The face plate, the turn bar, the base, and the fixings are separate pieces, and each one needs its own material answer. A single material word for the whole lock hides the pieces that matter.
That is why "solid brass" on a listing, without a breakdown, is not a settled claim. In the listings we checked, turn locks are commonly listed as die-cast metal or zinc alloy — a solid-brass version has to be asked for directly, and it is not confirmed until the supplier says so in writing, piece by piece.
The stock check makes the point. One stockist lists 164 turn locks in many sizes and shapes — but only 2 are solid brass, and 118 are zinc alloy. Another stockist carries only two solid-brass models, one size each. If the material matters to your bag, do not assume it from the listing title or the colour.
Finish is a separate question from material. Gold is a finish, not a material: a gold-coloured turn lock can be zinc alloy underneath, and at one stockist neither solid-brass model comes in gold at all. Ask material per component, in writing, and keep the answer with the order. If a part's material is not confirmed, say it is not confirmed.
4. Stock vs custom: what is actually on the shelf
Stock is thin. Two solid-brass models, one size each. No gold. No rectangle or oval in solid brass. No size range in the 1-1/4″ to 1-7/8″ band. The tuck lock style is listed in a single finish only, and the magnetic clasps in stock are zinc alloy, not brass. The wider range at one stockist is mostly zinc alloy.
Custom at the stockists is not a small-batch route. Their custom programs start at 1,500 to 2,000 pieces per style, with about 4 weeks for a sample and about 6 weeks for production. That is their route, and it prices out a maker who needs a few hundred pieces.
A shape, size, or finish that is not in stock has to be made — and the question to ask any supplier is the minimum order, the sample fee, and the sample lead time, in writing, before you commit. We do not publish a minimum or a price here because we have not verified one for a brass turn lock.
5. What to send, and quick answers
If you are asking someone else to make or supply a turn lock, send these and you will skip most of the back-and-forth:
- The bag it goes on, and a photo of the flap where the lock mounts
- Shape: round, rectangle, or oval — and which way it mounts
- Face width and height in millimetres, plus mounting and post dimensions for that exact lock
- What each piece is made of, asked piece by piece: face plate, turn bar, base, and fixings
- Finish, stated separately from material — gold is a finish, not a material
- Quantity — stock or custom depends on it
Is a turn lock the same as a door lock? No. Same words, different product. This page is about the lock on a handbag or leather bag flap. Check the listing shows a bag closure, not a door thumb turn.
Does the listed size tell me the face size? Not necessarily. A single number does not say which measurement it is. Ask in millimetres what it measures, and measure the sample yourself.
Does a gold finish mean solid brass? No. Finish is how it looks; material is what each piece is made of. A gold-coloured turn lock can be zinc alloy underneath. Ask per piece, in writing.
Why are there so few solid-brass turn locks in stock? The stock check: two models at one stockist, two out of 164 at another — the rest are zinc alloy or other materials. If you need a different shape, size, or finish in solid brass, it is a custom order.
Can I order a different shape or finish in a small batch? The stockists' custom programs start at 1,500 to 2,000 pieces per style. A small-batch custom order is a different route: ask the supplier for the minimum, the sample fee, and the sample lead time in writing before ordering.
This is a choosing method, not a product test. No specific turn lock, maker, or material result is claimed here. If a listing does not break the lock down by piece, ask before you order.
Related guides
Varestaq is an independent sourcing and product development partner based in China. Manufacturing partners are evaluated for each project; we do not operate a factory. Supplier capability, compatibility, MOQ, tooling requirements and lead time must be verified against your actual requirements before commitment.
Discuss your part, drawing or specification